DPF 4400

High Performance Changeable Calendered Digital Film

DPF 4400 is a 3.5-mil (90 micron) opaque satin white calendered film with a low profile air egress liner. DPF 4400 is designed for short term graphics with an easy installation due to the low profile air egress liner, and has a clean removal period of up to one year. The thicker facestock provides opacity to ensure your printed graphic looks vibrant and the added body aids in installation. The unique tack level of DPF 4400 makes it suitable for colder weather installations. DPF 4400 is rated for an outdoor durability up to 7 years (unprinted). Printed durability is dependent on the ink system used.

Applications & Features

  • Clean removing off of OEM painted surfaces without the use of heat or chemicals for up to one year, changeable
  • The low profile air egress liner allows for easy repositionability and bubble-free installation
  • Short term applications such as promotional vehicle advertising (flat), smooth interior painted walls general signage, and changeable graphics
  • Compatible with Series 3200, Series 3210, Series 3220, Series 3270, Series 3170 and Series 3420 overlaminates.
  • Print Compatibility: Solvent, Eco-Solvent, UV and Latex.

Performance & Physical Data

Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 40 to 60 gloss units
Thickness Micrometer, Federal Bench Type 3.5-mil (90 micron)
Tensile Strength Tensile Tester with 2-in (51 mm) jaw separation; crosshead speed of 12 in/min. (5.1 mm/s), web direction 14.9 lb/in 2.66 kg/cm
Elongation Instron Tensile Tester as above 250%
Shelf Life (In Box) Ideal Storage Temperature 70°F (21°C) and 50% relative humidity 1 year from factory shipment
Application Temperature Range On clean, dry substrate 50°F to 90°F 10°C to 32°C
Service Temperature Range On clean, dry substrate -40°F to 158°F -40°C to 70°C
Dimensional Stability Shrinkage After 158°F (70°C), 48 hours aging < 20 mils < 508 mm
Peel Adhesion PSTC-1, 15 min, 70°F (21°C) 1.02 lb/in 0.18 kg/cm
Liner Release TLMI Release at 90°, 300 in/min (760 cm/min) 65 g/2 in 12.8 g/cm
Standard Terms & Conditions Apply

ADDITIONAL CONSIDERATIONS

Arlon does not guarantee the successful application or removal of this film to painted interior & exterior walls due to the wide varieties in paints and sealants. It is highly recommended that the customer determine the compatibility and removability of the product and paint in question. Your Arlon Sales Manager can provide a Wall Wrap Questionnaire to help understand product performance requirements.

TERMS & CONDITIONS

The following is made in lieu of all warranties expressed or implied:

All orders and purchases made in connection with this document are governed and limited by Arlon’s Standard Terms and Conditions, which are incorporated in full by this reference and are available at http://www.arlon.com/terms-andconditions or in hardcopy by request.