Series 3200

Premium High Gloss Optically Clear Overlaminate

Series 3200 is constructed of 50 microns cast vinyl film with optically clear, permanent pressure-sensitive adhesive. Designed to protect and prolong the life of printed images for window applications, Series 3200 extends the life of graphics by 2 years.

Series 3200 is rated for outdoor durability up to 7 years.

This product is designed as an optically clear overlaminate for window film.

Applications & Features

  • Any glass or transparent surfaces
  • Reflective wraps
  • Perforated window film overlaminate for building, bus, automotive and flat glass
  • UV inhibitors to protect and extend the life of your printed graphic
  • Arlon overlaminate film is designed to be laminated cold without any heat

Performance & Physical Data

Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection ≥ 90 Gloss Units (crystal)
Thickness Micrometer, Federal Bench Type 50 microns
Tensile Strength Tensile Tester 51mm jaw seperation; crosshead speed of 5.1 mm/s, web direction ≥ 0.8 kg/cm
Elongation Instron Tensile Tester as above ≥ 150%
Shelf Life (In Box) Ideal storage temperature 21°C and 50% relative humidity 2 years from factory shipment
Application Temperature Range On clean, dry substrate 4.4°C to 38°C
Service Temperature Range On clean, dry substrate -40°C to 79°C
Dimensional Stability Shrinkage After 70°C, 48 hours 0.13 mm
Peel Adhesion PSTC-1, 15 min, 21°C 0.625 kg/cm
Liner Release TLMI Release at 90°, 760 cm/min 6.89 g/cm
Standard Terms & Conditions Apply

TERMS & CONDITIONS

The following is made in lieu of all warranties expressed or implied:
All orders and purchases made in connection with this document are governed and limited by Arlon’s Standard Terms and Conditions, which are incorporated in full by this reference and are available at https://www.arlon.com/eu_en/legal/terms-and-conditions or in hardcopy by request.