ProTec Series 3960

Heavy Duty Overlaminate

ProTec Series 3960 overlaminate is a 305 microns film with a clear, permanent pressure-sensitive adhesive. The heavy gauge product is designed to protect decals and graphics while maintaining high clarity. ProTec Series 3960 is rated for an outdoor durability up to 2 years.

Applications & Features

  • Protective overlaminate for racing, dirt bikes, and other recreational vehicles
  • Ideal for applications needing exceptional durability and abrasion resistance
  • Use in conjunction with Arlon’s DPF 8000™ Ultra Tack, DPF 8200X High Tack or DPF 8200 High Tack film
  • Designed to be laminated cold without any heat
  • Excellent clarity and gloss retention
  • Minimize silvering and enhance image quality with fast wet-out adhesive system

Performance & Physical Data

Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 70 to 90 Gloss Units
Thickness Micrometer, Federal Bench Type 305 microns
Tensile Strength Tensile Tester with 51 mm jaw separation; crosshead speed of 5.1 mm/s, web direction ≥ 8.16 kg/cm
Elongation Instron Tensile Tester as above ≥ 270%
Shelf Life (In Box) Ideal Storage Temperature 21°C and 50% relative humidity 1 year from factory shipment
Application Temperature Range On clean, dry substrate 10°C to 26°C
Service Temperature Range Film applied to etched aluminum panels 24 hours prior to testing -40°C to 80°C
Dimensional Stability 70°C, 48 hours, on aluminum panel 0.51 mm
Peel Adhesion PSTC-1, 15 min. 21°C ≥ 0.40 kg/cm
Liner Release TLMI Release at 90°, 760 cm/min 11.8 g/cm
Humidity Resistance Film applied to etched aluminum panels 24 hours prior to testing. 100% relative humidity, 38°C for 500 hours. No Appreciable Effect
Gasoline Resistance Film applied to etched aluminum panels 24 hours prior to testing. Immersed 30 minutes at 21°C, stabilized for 24 hours before inspection No Appreciable Effect

TERMS & CONDITIONS

The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.