DPF 4500G Clear

Intermediate Polymeric Film

DPF 4500G White is a 75 microns polymeric film with permanent pressure-sensitive and solvent-based adhesive. Designed for indoor and outdoor promotional graphics, DPF 4500G White is made of a polymeric facestock with a PE polycoated liner. The special glossy facestock is designed for applications requiring high gloss or more image “pop.” DPF 4500G White is rated for outdoor durability up to 5 years (unprinted). 
Printed durability is dependent on the ink system used.

DPF 4500G Clear is a 75 microns clear polymeric film with permanent pressure-sensitive and solvent-based adhesive. Designed for indoor and outdoor promotional graphics, DPF 4500G Clear is made of intermediate polymeric face stock with a PE polycoated liner. The special face stock is designed for applications requiring high gloss finish. DPF 4500G Clear is rated for outdoor durability up to 5 years (unprinted). Printed durability is dependent on the ink system used.

Applications & Features

  • Digital printing with a wide variety of direct print systems
  • Promotional and merchandising graphics
  • Medium-term signage, kiosks, POP displays and real estate signage*

* Recommended to test compatibility on raw & primed MDO prior to installation due to variation in substrate properties

Performance & Physical Data

Property Test Methods Typical Value
Surface Finish Gloss Meter 60° Reflection 80% to 90% (Gloss)
Thickness Micrometer, Federal Bench Type 75 microns
Tensile Strength Tensile Tester 51 mm jaw seperation; crosshead speed of 5.1 mm/s 2.3 kg/cm width
Elongation Instron Tensile Tester as above ≥ 150%
Shelf Life Free from excessive moisture, temperature, direct sunlight 1 year from factory shipment
Application Temperature Range On clean, dry substrate 16°C to 32°C optimum
Service Temperature Range On clean, dry substrate -29°C to 65°C
Dimensional Stability 70°C, 48 hours 0.64 mm
Peel Adhesion PSTC-1, 15 min, 21°C 0.63 kg/cm
Liner Release TLMI Release at 90°, 760 cm/min 0.017 kg/2 cm

TERMS & CONDITIONS

The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.