DPF 9000 is a 90 micron satin white, high-tensile, polyvinyl chloride lm with medium-tack, repositionable, permanent pressure-sensitive adhesive. Designed for outdoor graphics, DPF 9000 is made of 100% polymeric face stock with a special lay- at liner. The special adhesive system is designed to be solvent and heat resistant.
DPF 9000 is designed to meet the marketing requirements and speci cations of the transportation and automotive industries. The lm conforms well to at surfaces with slight contours when processed and applied according to Arlon recommendations. DPF 9000 is rated for outdoor durability up to 7 years (unprinted). Printed durability is dependent on the ink system used.
|Property||Test Methods||Typical Value|
|Surface Finish||Gloss Meter 60° Reflection||40% to 60%|
|Thickness||Micrometer, Federal Bench Type||90 micron|
|Tensile Strength||Tensile Tester with 51 mm jaw separation; crosshead speed of 5.1 mm/s, web direction||2.3 kg/cm width|
|Elongation||Instron Tensile Tester as above||100%|
|Shelf Life||Free from excessive moisture, temperature, direct sunlight||1 year from factory shipment|
|Application Temperature Range||On clean, dry substrate (flat)||4.4°C to 38°C optimum|
|Service Temperature Range||On clean, dry substrate||-54°C to 107°C|
|Dimensional Stability||70°C, 48 hours||0.50 mm|
|Peel Adhesion||PSTC-1, 15 min, RT 21°C||0.45 kg/cm|
|Liner Release||TLMI Release at 90°, 760 cm/min||12 g/cm|
The following is made in lieu of all warranties expressed or implied:
All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the speci c values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the of cers of seller and manufacturer.
DPF 9000 White