1. When using application fluids to detackify graphics while installing:
2. Application of reverse cut, second surface signage avoid wetting agents if possible:
3. Arlon does not recommend using wet application method with Series 2100X or DPF 6000XRP due to difficulty in effectively removing all water from between the adhesive layer and substrate.
Please Note: There are other fluids advertised to increase adhesion to difficult surfaces, Arlon has yet to review these and any found in the market should be tested prior to use.
Many of these TIPS come from our customer feedback and questions so be sure to reach out to us so that we can help you and in turn help others as well! Arlon Technical Services is here for you.