Application of pressure-sensitive material to flexible signface material, plastic sign faces and glass often requires the use of application fluid. Use the least amount of fluid needed to achieve repositionability. Be absolutely sure that all the wetting agent is removed from between the vinyl and the signage substrate. If any application fluid remains, bubbling will likely occur later. Also, be sure to allow enough time for good adhesion to build before removing the application tape.
NOTE: Not all application fluids (even commercial brands) result in optimal adhesive bond. The user assumes the responsibility to test all application fluids prior to installation to ensure successful film performance.
Many of these TIPS come from our customer feedback and questions so be sure to reach out to us so that we can help you and in turn help others as well! Arlon Technical Services is here for you.
Latin America | English
Latin America | Español
Australia, New Zealand | English
Europe, Middle East, Africa | English
Europe, Middle East, Africa | Français
Europe, Middle East, Africa | Italiano
Europe, Middle East, Africa | Deutsch
Europe, Middle East, Africa | Polski
Brazil | Portuguese