DPF 210 / DPF 210PB

Roll-Up Xtreme Polyester

DPF 210PB is a 9.8-mil (250 micron) premium, pebble textured, semi-rigid, coated polyester banner that is used in roll-up or pop-up banner applications. It has a gray, block-out layer that provides excellent opacity. DPF 210PB yields high print resolution and image quality, and has excellent lay-flat properties with minimal edge-curl. DPF 210PB is compatible with Eco-Solvent, Solvent and LatexQ inks. DPF 210PB is rated for indoor durability up to 1 year. Please use proper handling and correct profiles with appropriate heater settings for optimal prints.

Applications & Features

  • Digital printing with a wide variety of direct print systems
  • Indoor roll-up and pop-up display systems
  • Exhibitions, advertisements and POP displays

Performance & Physical Data

Property Test Methods Typical Value
Weight Internal Test Method 510 +/- 20 gram/sqm (15 +/- 0.25 oz/sqyd)
Thickness Micrometer, Federal Bench Type 9.8-mil (250 micron)
Color CIELAB 1.5 from Color Standard
Opacity Internal Test Method 90% - 100%
Gloss2 Gloss Meter at 60° Reflection < 15 Gloss Units
Tensile Strength ASTM D-882 Min. 100 lbs/in, 125 lbs/in 17.9 kg/cm, 22.3 kg/cm
Elongation ASTM D-882 Min. 150%, 75%
Tear Strength (Warp/Weft) ASTM D-1004 Min. 35 lbs/in, 35 lbs/in 6.25 kg/cm, 6.25 kg/cm
Printing Internal Test Method Eco-Solvent, Solvent, Latex**
Shelf Life (In Box) Free from excessive moisture, temperature, direct sunlight 1 year from production date
Storage Temperature Internal Test Method 85°F or lower
**Compatible with HP 360 Latex

Terms & Conditions

The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.