DPF 215

Pop-Up Film

DPF 215 is a 14.5-mil (370 micron) premium, semi-rigid, coated polyester banner that is used in pop-up banner applications. It has a gray, block-out layer that provides excellent opacity. DPF 215 is available in satin finish and yields high print resolution and image quality. It also has excellent lay-flat properties with minimal edge-curl. DPF 215 is compatible with Eco-Solvent, Solvent and Latex] inks. DPF 215 is rated for indoor durability up to 1 year. Please use proper handling and correct profiles with appropriate heater settings for optimal prints.

Applications & Features

  • Digital printing with a wide variety of direct print systems
  • Indoor roll-up display systems
  • Exhibitions, advertisements and point-of-purchase displays

Performance & Physical Data

Property Test Methods Typical Value
Weight Internal Test Method 510 +/- 20 gram/sqm (15 +/- 0.25 oz/sqyd)
Thickness Micrometer, Federal Bench Type 14.5-mil (370 micron)
Tear Strength (Warp/Weft) ASTM D-1004 Min. 70 lbs/in, 60 lbs/in 12.5 kg/cm, 10.7 kg/cm
Shelf Life (In Box) Free from excessive moisture, temperature, direct sunlight 1 year from production date
Storage Stability Internal Test Method 85°F or lower
Color CIELAB Max: DE 1.5 from color standard
Opacity Internal Test Method 90% - 100%
Gloss Gloss Meter at 60° Reflection < 15 Gloss Units
Tensile Strength ASTM D-882 Min: 200 lb/in, 250 lb/in (35.5 kg/cm, 44.6 kg/cm)
Elongation ASTM D-882 Min. 175%, 75%
Printing Internal Test Method Eco-Solvent, Solvent
**Compatible with HP 360 Latex

Terms & Conditions

The following is made in lieu of all warranties expressed or implied:

All statements, technical information and recommendations published by Arlon relating to Arlon products are based on tests believed to be reliable and within the accuracy of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon makes no warranty with regard thereto. Seller’s and manufacturer’s only responsibility shall be to replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using, user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon shall have force or effect unless contained in an agreement manually signed by the officers of seller and manufacturer.