Tipp
#47

Mixing Application Fluid (#47)

Application of pressure-sensitive material to flexible signface material, plastic sign faces and glass often requires the use of application fluid. Use the least amount of fluid needed to achieve repositionability. Be absolutely sure that all the wetting agent is removed from between the vinyl and the signage substrate. If any application fluid remains, bubbling will likely occur later. Also, be sure to allow enough time for good adhesion to build before removing the application tape.

NOTE: Not all application fluids (even commercial brands) result in optimal adhesive bond. The user assumes the responsibility to test all application fluids prior to installation to ensure successful film performance.

RECOMMENDED OFF THE SHELF APPLICATION FLUIDS:

  • Rapid Tac

Nicht gefunden wonach Sie suchen?

Viele dieser Tipps sind direktes von unseren Feedback von unseren Kunden, also kontaktieren Sie uns gerne, damit wir Ihnen helfen und wiederum anderen helfen können! Der technische Support von Arlon ist für Sie da.

Kundenservice kontaktieren